6 testo 6610 probes
101
6.4.2. Cleaning the instrument and filter/protection cap
• Only clean the instrument carefully with a moist cloth.
• Do not use aggressive cleaning agents.
• Do not use any solvents.
• Unscrew cap or protection cap to clean, clean with compressed
air and replace. Take care not to damage the sensor!
6.4.3. Replacing the sensor
Thanks to the probe concept (digital, plug-in), all probes can be
changed in situ within seconds if necessary, generally without any
interruption to the operation of the machine.
To maintain the extremely high accuracy of the testo 6610
probe, it is not possible for customers to change the sensor.
Please contact your Testo Service team for this.
To Next Page
Loading...