TESTO 6383 - Editing Main Menu Settings

4 Transmitter
46
4.4.5.5. Editing Main Menu Settings
You can edit instrument settings and other settings.
> In Measuring Mode, press SET, select Main Menu Settings
using  or  and confirm selection with SET.
You can edit settings for:
• Display
• Language
• Code
• Units
◦ Absolute pressure
◦ Area
◦ Temperature
• Humidity process data
◦ H2O2 percentage by weight
◦ Humidity process pressure
Editing display settings
You can set the brightness and contrast of the display.
1. Select Display Settings with  or  and confirm selection with
SET.
2. Select Backlight or Contrast with  or  and confirm
selection with SET.
One of the following parameters can now be selected using  or
, after which the selection must be confirmed with SET:
• Backlight
The display illumination is changed.
Edit/select parameter with  or , confirm with SET or cancel
entry with ESC (the effect of the change in parameter can be
seen during input).
• Contrast
The brightness difference between the display background and
the displayed values is changed.
Edit/select parameter with  or , confirm with SET or cancel
entry with ESC (the effect of the change in parameter can be
seen during input).
• Backlight 24h on
Select On or Off using  or  and confirm with SET.
Off: The display light switches off automatically if no button was
pressed for 10 seconds.
On: The display light is activated