TESTO 6383 - Status, warning and error messages

4 Transmitter
55
4.5. Status, warning and error messages
To achieve optimum operational reliability (machine availability),
the transmitter shows the following via the user menu or the P2A
software
• Status messages
• Warning messages
• Error messages
The status and warning messages for the respective testo 6610
probes connected to the transmitter can be evaluated via the P2A
software.
All messages are stored in the transmitter with an operating hours
stamp. Use the user menu (see 4.4.5.7. Editing Message main
menu) or the P2A software (see 7.3.5. volume 2, Transmitter
history) to view the message history.
In the transmitter, the last 60 status messages and the last 120
error and warning messages are stored in a ring memory. There is
no limit in the P2A software.
4.5.1. Status messages
Status messages show the current operating status of the testo
6383.
Message Display Description
02506
Sensor
initialization
Message appears while the
transmitter is starting up. If the
message disappears, the
transmitter is ready for operation.
01D19 Service plug The Mini-DIN socket is connected
to: the USB adapter for P2A
software, the adjustment adapter
or the service plug (is not
recorded/no number)
00300 New limit value The limit value has been changed
or shifted
00301 Scaling changed The scaling has been changed
00500 Transmitter reset The transmitter was reset to the
factory settings and is restarted.
0052F Reset Min/Max Resets all saved Min/Max values
for all channels