TESTO 6383 - Page 56

4 Transmitter
56
Message Display Description
02518 Probe reset
Probe reset: The probe performs a
reset
00503 Reset device to
fact
A factory reset of the transmitter
was performed
02503 Reset probe to
fact
A factory reset of the probe was
performed
00530 Change solenoid
valve
The solenoid valve should be
changed
00307 User Setting
Change
User Setting Change: General
settings were changed for the
transmitter.
00117 Adjustment DeltaP
An n-point adjustment was
performed.
02104 Analog adjustment
An analog adjustment has been
made
02101 1-point adjustment A 1-point adjustment is performed.
02102 2-
point adjustment
11.3 %
As part of the 2-point adjustment,
an adjustment is performed at
11.3 % RH
02103
2-
point adjustment
75.3 %
As part of the 2-point adjustment,
an adjustment is performed at
75.3 % RH
02120 2-
point adjustment
20 %
As part of the 2-point adjustment,
an adjustment is performed at
20 % RH
02130 2-
point adjustment
80 %
As part of the 2-point adjustment,
an adjustment is performed at
80 % RH
02105 Self-adjustment
active
For testo 6615 probe only: The
probe performs an automatic self-
adjustment