TESTO 6383 - Accessories; Design of the Probe

6 testo 6610 probes
73
6.1.2. Design of the probe
The probes of the testo 6610 family are made up of the following
components (included in delivery):
• Probe connector
• Probe shaft with protection cap and sensors (% RH and °C or
°F)
• Probe cable bend radius minimum Ø 50 mm.
1
Probe connector
2
Probe length
3
Probe
4
Protection cap, sensor underneath
5
Probe
6.1.3. Accessories
The following accessories are available for the probes from the
testo 6610 family:
• Filters and protection caps (see 6.2.1.4. Overview of probe and
filter types).
• Calibration certificate in accordance with ISO and DAkkS (see
8.2. Accessories and spare parts).