TESTO 6383 - Integrated humidity probe

6 testo 6610 probes
77
6.2.1.4. Protection caps
One of the following protection caps can be used for each probe
version:
Filter* Article no. ** Characteristic Length A
(mm)
M01 0554 0647 Protection cap made of stainless steel 33
M02
0554 0757
Protection cap made of wire mesh
40.3
M03 0554 0759 Protection cap made of PTFE 35
M04 0554 0755 Metal protection cap (open) 35
M06 0554 9913 PTFE protection cap with condensate
drip hole
35
M07 0554 9913 +
0554 0166
Protection cap made of PTFE with
condensate drip hole and
condensation protector
35
55
M08 0699 5867/1 Protection cap for H
2
O
2
atmospheres 35
* When ordering the probe, please use this protection cap code, cf.
see 6.2.1.3. Ordering options for testo 6610 probes (0555 6610).
** When purchasing a replacement (protection cap only), please
use this order number.
6.2.2. Integrated humidity probe
The integrated humidity probe is mounted on the wall together with
the ready-wired testo 6383 transmitter.
At a glance
1 Protection
cap
2 Probe shaft
3 Key
4 Connector