TESTO 6383 - Accessories and Spare Parts; Questions and Answers; Tips and Assistance

8 Tips and assistance
132
8 Tips and assistance
8.1. Questions and answers
Question Possible causes/solution
Connection to instrument
cannot be established
Check connection cable/plug contacts
A message appears on the
display
See volume 1, Status, warning and
error messages, page 55
Malfunction (with and
without display)
Analysis using the P2A software, see
Analyzing/testing the transmitter
, page
117
When does a stable
current reading appear?
After approx. 20 seconds
If we could not answer your question, please contact your dealer or
Testo Customer Service. For contact details see the rear side of
this document or the web page www.testo.com/service-contact
8.2. Accessories and spare parts
An overview of the probes that can be used with the testo
6383 can be found in volume 1, see Overview of probe and
filter types.
Description Article no.
Spare parts
Integrated humidity probe 0636 6610
Sealing frame 0554 6384
Protection Cap for the built-in humidity probe 0554 6385
Interface and software
P2A software (parameterizing, adjusting,
analyzing) incl. USB adapter
0554 6020
testo 400/650 adapter 0554 6022
Dewpoint measurement
(only with testo
6615)
Preliminary filter to protect measurement
chamber and sensors against contamination
0554 3311
Precision chamber with adjustable inflow 0554 3312