TESTO 6383 - First steps; Installing the software;driver

7 Parameterizing, adjusting and analyzing software (P2A software)
104
7.2.1.1. Installing P2A software
Without the input of a licence key, the software will run only
as a demo version (time limit 30 days).
1. You can download the software under the following link:
https://www.testo.com/download-center
. If the installation
program does not start automatically: > Open download folder
and start P2A.exe.
2. Follow the instructions of the installation wizard.
3. Click on [Finish] to complete the software installation.
7.2.1.2. Installing USB driver
1. You can download the USB driver under the following link:
https://www.testo.com/download-center
(Testo USB driver) If
the installation program does not start automatically: > Open
download folder and start USBDriver.exe.
2. Follow the instructions of the installation wizard.
3. Click on [Finish] to complete the software installation.
7.2.1.3. P2A software upgrade
1. Download and store P2A software upgrade from
www.testo.com/download-center (requires registration).
2. Select folder into which the downloaded Zip file was stored, and
unzip the file.
3. Start file P2A upgrade.exe.
4. Follow instructions from installation assistant.
7.2.2. Starting the software
7.2.2.1. Starting the program
> Click on All Programs (Windows
®
7, Windows
®
8, Windows
®
10) | Testo | P2A- Software.
In Windows Vista/Windows 7 the window
User account
control is opened when starting the software the first
time.
> Click on
Accept
.
- The program window is opened (see 7.3.1. User interface).
7.2.2.2. Establishing a connection with the instrument
The instrument works with limited functionality, if it is only
supplied via the service plug. Some settings, which can be
parameterized in the P2A software, will only be executed