TESTO 6383 - Operation

4 Transmitter
38
4.4. Operation
4.4.1. Relationship between user menu and mini-DIN
socket is active
The testo 6383 can be parameterized using either the user menu or
the P2A software (see 7., volume 2, Parameterizing, adjusting and
analyzing software (P2A software)).
The testo 6383 transmitter can only be operated via the
display and keypad if the display option is available.
If the testo 6383 is
connected to the P2A software, the user
menu is blocked for the duration of the communication. The
message Service plug is shown in the display of the testo
6383. As soon as the P2A software is disconnected, the
user menu is accessible again.
4.4.2. Password protection
The user menu can be protected with a four-digit numerical code
(see 4.4.5.5. Editing Main Menu Settings,) so that access to the
user menu is denied to unauthorized persons not familiar with this
numerical code.
If the password protection is not to be used, the numerical code
"0000" must be entered. This is also the status upon delivery.
4.4.3. Structure of user menu
At the main menu level, the user menu comprises the following:
• Main Menu Channel 1
• Main menu of channel 2 (if this option is available)
• Main menu of channel 3 (if this option is available)
• Main Menu Alarm
• Main Menu Settings
• Main Menu Analysis
• Main Menu Messages
• Main Menu Ident
• Main Menu Adjust
• Main Menu Reset