4 Transmitter
47
3. Return to Display Settings with ESC and use or to
continue to Language.
Selecting language
You can select the language for the plain text line in the display.
> Press SET, select required language with or , confirm
selection with SET and return to Language.
Only choose a language that you can understand well.
Editing code settings
You can set the access code (password).
If a code other than "0000" (factory setting) is set, the
transmitter can only be operated once this code has been
entered via the menu.
1. Select Code with or and confirm selection with SET.
2. Scroll one digit to the right using and increase value of digit
by 1 using . Confirm with SET or abort entry with ESC.
3. Return to Code with ESC and use or to continue to
Change parameters.
Select unit (Change unit)
This setting affects the displayed unit of all readings.
1. Press SET, select Change parameters with or , confirm
selection with SET or cancel with ESC.
2. Select Change unit with or , confirm selection with SET or
cancel with ESC.
3. Select the required variable (absolute
pressure/area/temperature) with or , confirm selection with
SET or cancel with ESC.
4. Select the required unit with or , confirm selection with SET
or cancel with ESC.
5 Return to Change unit with ESC.
6. Return to Change parameters with ESC.
7. Return to Main Menu Settings with ESC.
Editing Humidity process data
This menu is only used to parameterize humidity measurements in
H
2
O
2
atmospheres (e.g. in sterilization processes) and determines
whether °Ctm or °Ftm is the output parameter.
1. Select Humidity process data with or and confirm
selection with SET.
To Next Page
Loading...
