TESTO Saveris Series User Manual

6 Commissioning
19
6.3.3 Connecting GSM antenna (optional)
1
Fit antenna cable onto the coaxial connector and screw in .
6.4 Connecting Saveris base to power
supply
You can connect the Saveris base to the power supply via the mains unit which
is included or via the 24 V AC/DC plug-in/screw terminal.
6.4.1 Power supply via mains unit
1
Connect mains cable to the Saveris base.

TESTO Saveris Series Specifications

General

Measurement Parameters	Temperature, Humidity, CO2, Pressure, Differential Pressure
Humidity Range	0 to 100 %RH
CO2 Range	0 to 5000 ppm
Communication	Ethernet, WiFi, USB
Data Storage	Internal memory
Alarm	Visual and audible alarms
Power Supply	Battery, Mains power
Software	Testo Saveris software