TESTO Saveris Series - Connecting USB Cable and Installing Driver (Optional)

6 Commissioning
47
1
Open cover for power supply.
2
Insert mains cable .
3
Insert mains plug into a socket.
6.9.2.3 Connecting USB cable and installing driver
(optional)
1
Open the cover of the service interface on the Saveris Ethernet data
logger.
2
Connect the USB cable to the testo
programming adapter (0440 6723)
and plug into the service interface .

With the H4E Saveris Ethernet data logger, the external humidity probe
must be plugged in.
3
Connect the USB cable to the computer.

The driver installation wizard is started.
4
Follow the installation wizard’s instructions.