TESTO Saveris Series User Manual

6 Commissioning
34
4
Select the mail server or enter the mail
server.
5
Click on [Continue].

SMTP mail is installed.
6.7.2.3 Installing testo Saveris CFR transport add-on
Administrator rights are required for installation. Log in directly as the
administrator, not via Execute as…
You need to install the testo Saveris Client software, the SQL database
and the testo Saveris Viewer software to display the transport data. To
do this, follow the installation instructions for the testo Saveris CFR
software and then execute the Setup.exe file in the
TestoSaverisViewer folder on the testo Saveris CFR CD.
1
Insert CD with the testo Saveris transport add-on into the CD-ROM
drive.
2
Install it in the transport add-on of the SQL database by executing the
Setup.exe file in the TestoSaverisTransportPrerequisites folder.
3
Activate the transport certificates by executing the
RegTestoDevCerts.exe application in the RegTestoDevCerts folder.
4
Optional: If you are using the testo 184 transport data logger, you can
install the 3 software versions which are needed for different
applications. To do this, run the relevant Windows installer in the sub-
folders:
1. t184cfgtmpl: Software for the creation of configuration
templates.
2. t184cfguser: Software for the configuration of testo 184 transport
data loggers when using previously created configuration
templates.
3. t184saveris: Software for the readout of testo 184 transport data
loggers.

TESTO Saveris Series Specifications

General

Measurement Parameters	Temperature, Humidity, CO2, Pressure, Differential Pressure
Humidity Range	0 to 100 %RH
CO2 Range	0 to 5000 ppm
Communication	Ethernet, WiFi, USB
Data Storage	Internal memory
Alarm	Visual and audible alarms
Power Supply	Battery, Mains power
Software	Testo Saveris software