TESTO Saveris Series - Setting up Saveris Base with the Stand

6 Commissioning
67
5
Place Saveris base on the wall
bracket and secure with screw .
6.10.2 Setting up Saveris base with the stand
When selecting the location for the Saveris base, take into account the
following points:
• The Saveris base must be on a level, non-slip surface.
• The Saveris base must be positioned close enough to the computer
used and a possible power supply in accordance with the cabling
provided.
1
Place the Saveris base on the
stand .
2
Set up the Saveris base at the required location.