TESTO Saveris Series User Manual

7 Maintenance
96
5
Open Windows
®
Explorer and click on FWUPDATE.
6
Remove the file included under FWUPDATE.
7
Switch to the destination directory where you saved the new firmware
file you downloaded.
8
Copy the new firmware file of the Saveris cockpit unit into the
FWUPDATE directory.

The Saveris cockpit unit firmware update is completed.

TESTO Saveris Series Specifications

General

Measurement Parameters	Temperature, Humidity, CO2, Pressure, Differential Pressure
Humidity Range	0 to 100 %RH
CO2 Range	0 to 5000 ppm
Communication	Ethernet, WiFi, USB
Data Storage	Internal memory
Alarm	Visual and audible alarms
Power Supply	Battery, Mains power
Software	Testo Saveris software