Texas Instruments BQ28Z610-R2 User Manual

0 = Not Detected
UTC (Bit 26): Undertemperature During Charge
1 = Detected
0 = Not Detected
0 = Not Detected
CTOS (Bit 21): Charge Timeout Suspend
1 = Detected
0 = Not Detected
PTOS (Bit 19): Precharge Timeout Suspend
1 = Detected
0 = Not Detected
OTD (Bit 13): Overtemperature During Discharge
1 = Detected
0 = Not Detected
OTC (Bit 12): Overtemperature During Charge
1 = Detected
0 = Not Detected
ASCD (Bit 10): Short-Circuit During Discharge
1 = Detected
0 = Not Detected
ASCC (Bit 8): Short-Circuit During Charge
1 = Detected
0 = Not Detected
AOLD (Bit 6): Overload During Discharge
1 = Detected
0 = Not Detected
OCD (Bit 4): Overcurrent During Discharge
1 = Detected
0 = Not Detected
OCC (Bit 2): Overcurrent During Charge
1 = Detected
0 = Not Detected
COV (Bit 1): Cell Overvoltage
1 = Detected
0 = Not Detected
CUV (Bit 0): Cell Undervoltage
1 = Detected
0 = Not Detected
12.2.27 MACSubcmd() 0x0051 SafetyStatus
This command returns the SafetyStatus() flags on MACData().
Status Condition Action
Activate 0x0051 to MACSubcmd() Outputs SafetyStatus() flags on MACData()
www.ti.com I2C Commands
SLUUCO0 – APRIL 2022
Submit Document Feedback
BQ28Z610-R2 79
Copyright © 2022 Texas Instruments Incorporated

Texas Instruments BQ28Z610-R2 Specifications

General

Brand	Texas Instruments
Model	BQ28Z610-R2
Category	Computer Hardware
Language	English