About This Manual
This technical reference manual discusses the modules and peripherals of the BQ28Z610-R2 device, and how
each is used to build a complete battery pack gas gauge and protection solution. For BQ28Z610-R2 electrical
specifications, see the BQ28Z610-R1 1-Cell to 2-Series Cell Li-Ion Battery Pack Manager Data Sheet.
Notational Conventions
The following notation is used if SBS commands and data flash (DF) values are mentioned within a text block:
• SBS commands: italics with parentheses and no breaking spaces; for example, RemainingCapacity()
• Data flash: italics, bold, and breaking spaces; for example, Design Capacity
• Register bits and flags: italics and brackets; for example, [TDA]
• Data flash bits: italics and bold; for example, [LED1]
• Modes and states: ALL CAPITALS; for example, UNSEALED
Trademarks
Impedance Track
®
is a registered trademark of Texas Instruments.
All trademarks are the property of their respective owners.
Glossary
TI Glossary This glossary lists and explains terms, acronyms, and definitions.
Preface
Read This First
www.ti.com Read This First
SLUUCO0 – APRIL 2022
Submit Document Feedback
BQ28Z610-R2 9
Copyright © 2022 Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
