Restore Factory Settings
You can reset your UltraSync ONE to its original state by selecting Set Factory
Defaults. This can be useful if you want to start with a completely fresh UltraSync
ONE, for example, when moving the UltraSync ONE into another network.
Note: If you want to reset the UltraSync ONE without losing the existing
settings, see Reset on page 106.
To restore the factory settings of your UltraSync ONE:
1. Make sure your UltraSync ONE is switched on (see Switch UltraSync ONE On
and Off on page 11).
2. Press the Select button.
3. Use the Up and Down buttons to scroll to the System Settings option.
4. Press the Select button.
5. Use the Up and Down buttons to scroll to Set Factory Defaults.
6. Press the Select button. The UltraSync ONE is reset to have all the default
settings in place and the main screen is displayed.
UltraSync ONE User Guide 105
To Next Page
Loading...