timecode systems UltraSync ONE - LTC Output Status

LTC Output Status
You can use the LTC O/P status screen to see what frames-per-second and level
your UltraSync ONE is using for the LTC output port.
1. Display the Main Screen on page 86.
2. Use the Up and Down buttons to scroll to the screen that shows LTC O/P at
the top.
Status Description
FPS The frames-per-second rate of your UltraSync ONE. This should match
the FPS of any attached devices (see Set the Frame Rate Per Second
on page 73).
Level The voltage level of the LTC output (see Set the SYNC Output on page
76).
UltraSync ONE User Guide 91