RF Network
To synchronise two or more Timecode Systems products, you need to set them to
operate in a network. There are two different types of network:
l RF network
l BLINK network.
In this section, we are going to look at the RF Network. To learn about the BLINK
network, see BLINK Network on page 31.
What is an RF Network?
An RF network is a group of Timecode Systems devices that are all set to
communicate on the same radio frequency (RF channel). The devices in an RF
network can synchronise with each other over distances of 200m* (with internal
antenna), and they communicate using our proprietary RF protocol.
*200m clear line of sight.
UltraSync ONE User Guide 29
To Next Page
Loading...