UltraSync ONE for Synchronisation
UltraSync ONE is a highly accurate timecode generator and multichannel digital
timecode transceiver.
You can use your UltraSync ONE as:
l a stand-alone device to provide timecode, genlock, and word clock to your
camera or sound mixer/recorder
l a timecode master, where it provides timecode to other Timecode Systems
products for synchronisation
l a timecode slave, where it receives timecode from a 'master' device and then
provides this timecode to your camera or sound mixer/recorder.
You can learn more about these modes in Networks and Modes on page 23.
Tip: If you use UltraSync ONE with a :pulse, you have free access to the
BLINK Hub app. You can use the app to configure and monitor your
UltraSync ONE. For more details, see Remote Settings using BLINK Hub on
page 94.
10 UltraSync ONE User Guide
To Next Page
Loading...