Timecode Systems devices, including your UltraSync ONE, can
synchronise wirelessly over a distance of approximately 200m*. To
synchronise, they use our proprietary radio protocol, and have to be set
up to operate in a network.
*based on an uninterrupted line of sight.
In the following sections, you will learn about the different types of
network, the master and slave relationships that are used for
synchronisation, and the different timecode modes that your UltraSync
ONE supports:
Master and Slaves 24
RF Network 29
BLINK Network 31
Master TX 33
RF Slave 35
EXT LTC Input 36
Free Running and Jamming 39
Output via SYNC 42
UltraSync ONE User Guide 23
Networks and Modes
Chapter 2 Networks and
Modes
To Next Page
Loading...