timecode systems UltraSync ONE - How Can I Tell if a Slave Is Communicating with a Master

See also:
l What if a Slave Cannot Find a Master? (see page 26)
l How Can I Tell if a Slave is Communicating with a Master? (see page 25)
l Multiple Masters in the Same Network (see page 28)
l RF Slave (see page 35).
How Can I Tell if a Slave is Communicating with a Master?
You can tell when a slave is connected with a master by looking at its main screen
display.
An antenna icon flashes in the top-right corner when the slave and master are
communicating. The number shown to the right of the antenna icon shows the
signal strength (0-7 where 7 is the maximum signal strength).
Note: The LED flashes green in time with the master when a connection is
established and maintained.
UltraSync ONE User Guide 25