Set the RF Country/Area
Your UltraSync ONE can communicate with other devices via radio (RF). Before you
use your UltraSync ONE, you need to set it to use the correct radio frequencies for
your region. This is because the regulations for the use of radio frequencies vary in
different countries.
Note: The RF Country/Area setting does not apply to units sold in North
America and Canada. If you purchased your UltraSync ONE in the US or
Canada and wish to use it in another country, please contact Timecode
Systems. We can provide you with a free updater application that will
allow you to set the country/area.
To set the RF country/area:
1. Make sure your UltraSync ONE is switched on (see Switch UltraSync ONE On
and Off on page 11).
2. Press the Select button.
3. Use the Up and Down buttons to scroll to the System Settings option.
4. Press the Select button.
5. Use the Up and Down buttons to scroll to the Set RF Country/Area option.
6. Press the Select button.
7. Use the Up and Down buttons to select the appropriate area:
l Europe/UK
l Japan/China
l US/CA/AU/NZ (for USA, Canada, Australia, or New Zealand).
8. Press the Select button to confirm. Your UltraSync ONE will now communicate
using radio frequencies that are appropriate for the region you selected.
Tip: You can see which country/area your UltraSync ONE is set to use by
looking at the main status screen (see Main Screen on page 86). In the
bottom-right corner, the country/area is shown next to the channel (CE
for Europe, JP for Japan/Asia, and FC for USA, Canada, Australia, and
New Zealand).
64 UltraSync ONE User Guide
To Next Page
Loading...