In this chapter, you can learn how to perform various configuration
tasks. You will have to complete some of the tasks to get your UltraSync
ONE up and running, but other tasks are optional.
Set the RF Country/Area 64
Set the Timecode Mode 65
Set the RF Channel 68
Set the Timecode for the Master 72
Set the Frame Rate Per Second 73
Set the User Bits 74
Set the SYNC Output 76
Set the LTC Level 78
Change the Status Indicator LED Brightness 79
Change the Screen Brightness 80
Change the Screen Saver Time 81
Flip the Display 82
Button Lock 83
UltraSync ONE User Guide 63
Configuration
Chapter 4
Configuration Settings
To Next Page
Loading...