■
3-64
g) Anterior Analysis
■
When you use the result of this function for operations
and medical treatments, make a comprehensive
decision considering the results of other measurement
devices and differences between left and right.
■
The FREEZE menu window is enabled when the 60 MHz
UBM probe is selected.
■
The automatic analysis function may display an
incorrect analysis result depending on the image
condition. Set the analysis point manually as desired.
This function analyzes parameters concerning the angle, iris, and ciliary
body. Specification points are specified on the image to be analyzed and
the analysis is performed automatically or manually. The result is displayed
within the analyzed image.
3-59
(1)
(Fig. 1)
To Next Page
Loading...
Need help?
General
