Tomey UD-8000 User Manual

3-159 ■
f) Intraocular pressure correction function
This instrument automatically starts calculation and displays the result
when all items required for calculating the intraocular pressure correction
are set.
1) Touch the “IOP” button (1) to open the intraocular pressure correction
screen (Fig. 2). When a measurement has already been completed at this
point, the measured value is displayed in the CCT field (2).
However, if measurement points are set and two or more “CCTs” are
included in them, the average of the CCTs is displayed. When
measurement points are not set, the average of all memory numbers is
displayed.
(1)
(Fig. 1)
3-115
(Fig. 2)
(4)
(5)
(6)
(3)
(2)
3-117
(7)

Tomey UD-8000 Specifications

General

Brand	Tomey
Model	UD-8000
Category	Medical Equipment
Language	English