■
3-160
2) The input fields of the parameter 1 (3) and parameter 2 (4) for the
intraocular pressure correction formula become active when touched, and
the keypad appears. Also, when a formula selection button is touched, the
already set parameters are displayed in the intraocular pressure correction
formula.
[Acceptable range]
■ Parameter 1: 0 – 1500
■ Parameter 2: 0.0000 – 1.0000
3) Enter the intraocular pressure data. The keypad appears when the entry
field (6) is touched.
[Acceptable range]
■ Intraocular pressure data: 1 – 60.0 (mmHg)
1.33 – 79.99 (hPa)
4) Touch the “Meas/Edit” button (7) to close the intraocular pressure
correction screen (Fig. 2) and return to the previous screen.
To Next Page
Loading...
Need help?
General
