3-213
■
d) Tomey Link Setup
(1) Tomey Link Setup
Sets whether to connect the instrument with Tomey Link and Data Transfer.
(2) Auto Inquiry (For patient’s info)
Sets whether to make inquiry for patient information automatically to Tomey Link.
(3) Patient ID
Sets whether the ID must be entered when sending examination data to Tomey Link
Indispensable: Select this when ID numbers are always required to be entered. Data cannot
be sent when the ID is not entered.
Recommended: Select this when the ID is usually set to send data, but the data can be also
sent without setting the ID. Data is sent as the one of which ID is “No ID”
when the ID is not entered.
Not Used: Select this when no special attention is paid to entry of the ID. The transfer
confirmation screen appears, but the inspection data is automatically sent.
Data is sent as the one of which ID is “No ID” when the ID is not entered.
3-143
(Fig. 1)
(1)
(3)
(4)
(2)
(8)
(5)
(6)
(7)
(9)
To Next Page
Loading...
