■
3-214
(4) Priority of Operation
Sets whether to display the patient information entry screen automatically to enter ID before
starting the measurement.
ID Input: The patient information entry screen appears automatically.
Measurement: The patient information entry screen does not appear automatically.
(5) Machine No.
When multiple sets of this instrument are connected with one Tomey Link server, the data
source can be identified by setting numbers not overlapping with each other to “Machine No.”
(5).
(6) Input Mask
Sets which part of the character string should be recognized as the ID number when entering
the ID number from a barcode. If it starts from “0” or “1”, the characters from the very beginning
are identified as the ID number.
(7) Connection Type
Sets the cable type when connecting the instrument to a personal computer.
LAN / USB
(8) “LAN Setting” button
Hold this button briefly to display the LAN Setting screen. (Fig. 2)
(9) “Undo” button
Cancels the entered data and settings to restore the settings when the Tomey Link Setup
screen was opened.
To Next Page
Loading...
