3-215
■
[LAN Setting screen]
(1) IP Setting
Selects either of DHCP (dynamic IP) or MANUAL (static IP) in the IP Setting Type. When
MANUAL is selected, My IP Address, Sub Net Mask, Default Gateway, Host IP Address can
be specified. When DHCP is selected, My IP Address, Sub Net Mask, Default Gateway, Host
IP Address cannot be specified. DNS can also be used with DHCP selected. For details, refer
to [Connection Setting: DNS] (Fig. 3).
(2) Login Tomey Link
Set the ID and password to log in to the Tomey Link. Maximum number of characters to be
entered for the user ID or password is 16.
(3) Setting status display
Displays the MAC address and LAN connection state.
(4) “Connection Test” button
Performs a connection test.
(5) “Initialize” button
Changes all items of the LAN Setting to the default settings.
(6) “OK” button
Applies the entered data and returns to the top page of the Tomey Link Setup.
3-144
(1)
(Fig. 2)
(2)
(3)
(5)
(6)
(7)
(4)
To Next Page
Loading...
