7
cooling fans.
z Don’t frequently turn on and off the instrument, doing so will lead to the loss of
the calibrated data and the data saved by users.
1.3 Dimension and weight
Dimensions: 350(W) by 110(H) by 340(D) (mm)
Weight: Approximately 4 kg
1.4 Safety Summary
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument.
Ground the Instrument
To avoid electric shock hazard, the instrument chassis and cabinet must be
connected to a safety earth ground by the supplied power cable with earth blade.
DO NOT Operate In an Explosive Atmosphere
Do not operate the instrument in the presence of flammable gasses or fumes.
Operation of any electrical instrument in such an environment constitutes a definite
safety hazard.
Keep Away From Live Circuits
Operating personnel must not remove instrument covers. Component replacement
and internal adjustments must be made by quailed maintenance personnel. Do not
replace components with the power cable connected. Under certain conditions,
dangerous voltages may exist even with the power cable removed. To avoid injuries,
always disconnect power and discharge circuits before touching them.
DO NOT Service or Adjust Alone
Do not attempt internal service or adjustment unless another person, capable of
rendering first aid and resuscitation, is present.
DO NOT Substitute Parts or Modify Instrument
Because of the danger of introducing additional hazards, do not install substitute
parts or perform unauthorized modifications to the instrument. Return the instrument
to our Sales and Service Office for service and repair to ensure that safety features
are maintained.
1.5 Electromagnetic compatibility
This product has been designed and tested to the requirements of the
Electromagnetic Compatibility (EMC) Directive. To use a properly shielded cable or
shielded coaxial cable to connect each of the ports to their respective controllers,
peripherals, equipments or devices may ensure to meet the requirements.