Topcon GR-5 User Manual

Configuring the Receiver Using TRU
P/N 7010-1004
3-31
• Total number of received corrupt messages (dependent on the
message type received)
If the receiver is not (for some reason) receiving differential
corrections, or if none of the ports has been configured to receive
differential corrections, the Link Quality field will either be
empty or it will show 100%.
Figure 3-28. Status - Data Link
17. Continue with other configuration activities or click Device
Disconnect, then DeviceExit to quit TRU. Disconnecting
before exiting ensures proper port management.
NOTICE
Disconnect the receiver from TRU before exiting to
eliminate possible conflicts with the management of
the computer’s serial ports.

Topcon GR-5 Specifications

General

Brand	Topcon
Model	GR-5
Category	Receiver
Language	English