Topcon GR-5 User Manual

GR-5 Configuration
GR-5 Operator’s Manual
3-44
• Always append to the file on page 3-44
• Files Creation mode on page 3-44
• Automatic File Rotation Mode (AFRM) on page 3-44
• FN key mode on page 3-46
• Initial data collection dynamic mode on page 3-46
• Data recording auto-start on page 3-46
Figure 3-41. Receiver Configuration – MINTER Tab
Recording Interval parameter This parameter specifies the logging
rate of the log file when the MINTER FUNCTION button (pressed
for 1–5 seconds) activates data logging. This setting is used for both
logging a single log file and logging receiver data in AFRM mode.
Values are 1–86400 seconds. The default value is one second.
Elevation Mask for Log File parameter This parameter specifies the
minimum elevation angle for the satellites whose data is put in the
receiver files logged when pressing FUNCTION. The default value
is five degrees.
File Name Prefix parameter This parameter specifies the prefix
added to the names of receiver files created when pressing
FUNCTION. The prefix can be up to 20 characters long. The default
value for the Name Prefix is “log”.

Topcon GR-5 Specifications

General

Brand	Topcon
Model	GR-5
Category	Receiver
Language	English