Topcon HiPer+ - Serial C-RS232 Connector

Specifications
HiPer+ Operator’s Manual
C-10
Table C-4 gives power connector specifications.
Serial C-RS232 Connector
For ports A and D, these (Figure C-2) are sealed receptacle, 7 pin,
ODU p/n G80F1C-T07QC00-0000 RS232 connectors.
Figure C-2. RS232 Connector
Table C-5 gives the RS232 cable connector specifications.
Table C-4. Power Connector Specifications
Number Signal Name Dir Details
1 Power_INP P 6 to 28 volts DC input
2 Power_INP P 6 to 28 volts DC input
3 Power_GND P Ground, power return
4 Power_GND P Ground, power return
5 Not used
Table C-5. RS232 Connector Specifications
Number Signal Name Dir Details
1 Power_OUT P Power Output (supplied voltage)
2 GND - Signal ground
3 CTS I Clear to send
4 RTS O Request to send