Topcon HiPer+ - Chapter 1 Introduction

P/N 7010-0526
Chapter 1
1-1
Introduction
The HiPer+ receiver is a dual-frequency, GPS+ receiver built to be the
most advanced and compact receiver for the surveying market. The
receiver is a multi-FN, multi-purpose receiver intended for precision
markets. Precision markets means markets for equipment,
subsystems, components and software for surveying, construction,
commercial mapping, civil engineering, precision agriculture and
land-based construction and agriculture machine control,
photogrammetry mapping, hydrographic and any use reasonably
related to the foregoing.
The HiPer+ can receive and process both L1 and L2 signals,
improving the accuracy of your survey points and positions. The
GPS+ component of HiPer+ receivers means you can access both the
GPS (Global Positioning System) satellites of the United States, and
the GLONASS (Global Navigation Satellite System) satellites of the
Russian Federation, increasing the number of satellites your receiver
can detect, thus improving the accuracy of your survey points,
increasing productivity, and reducing cost.
Figure 1-1. HiPer+ Receiver