Topcon HiPer+ - Installing Software; Installing PC-CDU

Pre-survey Preparation
HiPer+ Operator’s Manual
2-2
Installing Software
The Topcon GPS+ CD includes the following software programs used
for configuring and maintaining the receiver. This software is also
available on the TPS website to registered users.
The radio configuration utility for PDL modems (PDLCONF) is
available on the Pacific Crest website (www.paccrst.com and navigate
to the Downloads > Upgrades page).
If installing the program(s) from the GPS+ CD, insert the CD into the
computer’s CD-ROM drive. If downloading the program(s) from a
website, extract the program’s files into a folder on your hard drive.
The following sections describe installing this software, and other
sections throughout the manual describe using this software with the
receiver.
Installing PC-CDU
PC-CDU™ is a comprehensive Windows® software product
designed for controlling GPS+ receivers developed by Topcon
Positioning Systems. PC-CDU uses the GPS Receiver Interface
Language (GRIL) to configure various receiver settings and diagnose
receiver performance.
The PC-CDU software exists in two versions: a full-functionality
version called PC-CDU MS and a reduced-functionality version
called PC-CDU Lite. PC-CDU Lite is available for free on the Topcon
website or the GPS+ CD.
• PC-CDU Lite
ver 2.1.14p1 or newer
• PDLCONF
ver 2.40 or newer
• BTCONF
ver 1.1 or newer
• FLoader
ver 1.0.07 or newer