Topcon HiPer+ - Configuring the Radio Modem

Configuring the Radio Modem
P/N 7010-0526
3-3
Configuring the Radio Modem
The internal radio in your HiPer+ and the base radio can be
configured differently depending on your needs and working
conditions. The software program required to configure the radio
modem differs depending on your receiver configuration, and allows
you to:
• access the internal modem
• configure the modem
• check or change the modem configuration
The following sections provide basic radio configuration information
for UHF and GSM radio modems.
Topcon’s configuration and surveying software, TopSURV, also has
the ability to configure Topcon receivers. Refer to the TopSURV
Reference Manual or TopSURV User’s Manual for details.
NOTICE
Note that the UHF radio and the GSM radio do not
work simultaneously. Only one radio may be used
at a time.
NOTICE
Your receiver may be configured without a radio
modem. Continue with other configuration and
surveying functions.