Topcon HiPer+ - Appendix B Creating Scripts

P/N 7010-0526
Appendix B
B-1
Creating Scripts
Script files allow you to save manual commands into one file. You can
then load this single script instead of typing each individual
command. Use the following procedure to create script files.
1. Connect your receiver and computer. See “Connecting the
Receiver and a Computer” on page 2-14 for this procedure.
2. Start PC-CDU.
3. Click on FileManual Mode.
4. Click Edit script.
5. Navigate to the folder in which you want to save the script file.
6. Type the file name. All files have a .jpc extension.
For example, Daisy_38400.jpc to enable the daisy chain and
Daisy_Off.jpc to disable the daisy chain.
7. Click Yes to create the file.
TIP
For more information on script files, refer to the
PC-CDU User’s Manual.