21
COMPONENTS
PRINTER OUTPUT (IN TONO/PACHO MEASUREMENT MODE)
Printed example when "Printer order" of "Print" is set to "SIMPLE"
* As for the patient No., the result of the printing will differ depending on whether the patient ID
is inputted or not inputted.
Input : Patient ID is printed.
Not input : Patient No. (starts from 0001, automatically added +1 upon completion of mea-
surement) is printed.
NOTE
• The "M" mark is printed on the value measured by manual measurement or
measured by start button in Auto mode. (In the error of ERR, OVER, etc.,
the "M" mark is not printed.)
• The value with low reliability is outputted with the parenthesis notation.
-CT 010017-
OID:TOPCON_TAROU
NAME
2012_01_01
TONO. DATA
PACH. DATA
R (13)M ( 8)M 7M 7.0
L 9 ( 7) (10) 9.0
hPa AVG.
R (13)M ( 8)M 7M 7.0
L 9 ( 7) (10) 9.0
ADJ. AVG.
R 509M 518M 526M 517
L
IOP ADJ FORMULA
A
:
520 B
:
120
521 523 522 522
um AVG.
AM 11:00
TOPCON
Hello World
NO:Patient ID
SN:0000001
01
Barcode
Patient No.
Patient No.
(Patient ID when Patient ID is input) *
Device ID number
Operator ID
Tono value on display unit "hPa"
Topcon Logo mark
Name entry column
Message column
Device ID number
Serial number
Title of Tono value
Tono average value on
display unit "hPa"
Measurement date
Display unit at Tono
Result of IOP adjustment by CCT
Adjusted measurement value
Title of Pacho value
Display unit at Pacho
Measured value of CCT
Average value of
adjusted measurement value
Average value of CCT
Title of IOP ADJ Formula
Center CCT Base/
Adjustment Coefficient
To Next Page
Loading...
Need help?
General
