Topcon TRK-2P - Replacing the Chinrest Tissue Paper

118 pages

To Next Page

To Previous Page

MAINTENANCE

REPLACING THE CHINREST TISSUE PAPER

• When the chinrest tissue paper has run out, pull off the chinrest tissue pins and replace it with new

tissue paper.

Chinrest tissue pins

Chinrest tissue

paper

Main Page

Introduction3
Table of Contents5
General Safety Information8
How to Read this Manual10
General Maintenance Information10
User Maintenance10
Fuse Change10
Cleaning the Measuring Window Glass10
Cleaning the Measuring Nozzle and Window Glass Inside the Measuring Nozzle10
Disclaimers10
Displays and Symbols for Safe Use11
Displays11
Symbols11
Positions of Warning and Caution Indications12
Components13
Component Names13
Composition of Parts Which Contact the Human Body13
Operation Method of Control Panel14
Control Panel Components (in Ref/Krt Measurement Mode)14
Function Button15
Monitor Screen16
Control Panel Components (in Tono/Pacho Measurement Mode)17
Function Button18
Monitor Screen19
Printer Output (in Ref/Krt Measurement Mode)20
Printout Format Setting22
Printer Output (in Tono/Pacho Measurement Mode)23
Standard Accessories26
Preparations27
Installation27
Connecting Power Cable27
Connecting External I/O Terminals28
Data Output28
Data Input29
Printer Paper Setting29
Recovery from Power Save Status31
Adjusting the Control Panel Position31
Basic Operations32
Operation Flow Chart32
Preparation before Measurement33
Turning on the Instrument33
Selecting the Measurement Mode34
Checking the Measuring Nozzle35
Air Check36
Setting the Patient ID38
Patient Positioning39
Setting the Safety Stopper40
Measurement in Ref/Krt→Tono/Pacho Continuous Measurement Mode43
Checking the Measurement Mode -Ref/Krt→Tono/Pacho Continuous Measurement Mode44
Setting the Auto Mode in Ref/Krt44
Alignment and Measurement in Ref/Krt44
Setting the Auto Mode in Tono/Pacho46
Setting the Measuring Range47
Alignment and Measurement in Tono/Pacho47
Displaying Measurement Values50
Print-Out of Measurement Values51
End of Measurement51
Clearing Measurement Values52
Displaying All Measurement Data53
Operation after Use58
Optional Operations59
DISPLAYING the PATIENT ID (PATIENT No.) or OPERATOR ID59
Selecting the Details in Measurement Mode60
Manual Mode in Ref/Krt61
Manual Mode61
Alignment and Measurement61
Displaying Measurement Values65
For Explanation of the Messages on the Control Panel Screen, Refer to65
Message List65
Measurement of Cornea Diameter (in Ref/Krt)66
Measurement on the Actual Image66
Measurement on the Still Image68
Manual Mode in Tono/Pacho70
Setting the Manual Mode70
Setting the Measuring Range70
Alignment and Measurement71
Displaying Measurement Values74
Error: over74
When the Reliability of Measurement Is Low.(Only TONO) Measurement was Not Done Correctly74
When the Measurement Range Is Exceeded.(Only TONO)74
In TONO Average Value Display, Low-Reliability Numerical Data with [ ] Are74
Not Added to Average Value Calculation74
In the Data Printout, Manual Measurement Values will Have M Marks74
Iol Mode in Tono/Pacho75
Setting the Iol Mode75
Setting the Iol Camera Focus75
Setting the Iol Led Brightness76
Measuring One Eye Only77
Measuring the Right Eye Only77
Measuring the Left Eye Only77
Output Using Rs-232C78
Input Using Usb78
Output Using Lan78
Setting Functions on Setup Screen79
Operating the Setup Screen79
Preparatons for Setting79
Outline of Setup Screen Operations (in Case of Initial and Print)80
OUTLINE of SETUP SCREEN OPERATIONS (in CASE of "Comm", "LAN", and "OPERATOR ID")83
Returning to the Measurement Screen85
List of Setup Items86
Initial Settings86
Internal Printer89
Data Communication (Comm)92
Lan Connection (Lan)92
Operator Settings93
Special93
Daily Checkups94
Cleaning the Instrument94
Cleaning the Measuring Window Glass94
Cleaning the Measuring Nozzle and the Glass Inside the Measuring Nozzle95
Cleaning the Components that Come into Contact with the Patient96
Daily Maintenance96
Ordering Consumable Items96
User Maintenance Item96
Manufacturer Maintenance Items97
Brightness Adjustment of the Control Panel97
Printer Paper Jam97
Fuse Change98
Replacing the Chinrest Tissue Paper99
Maintenance100
Cleaning the Instrument Cover100
Cleaning the Control Panel100
Troubleshooting101
Trouble-Shooting Operations101
Message List101
Air Check104
Trouble-Shooting Operations104
Specifications and Performance105
General Information on Usage and Maintenance106
Intended Patient Population106
Intended User Profile106
Environmental Conditions of Use106
Storage, Usage Period106
Environmental Conditions for Packaging in Storage106
Environmental Conditions for Packaging in Transportation107
Electric Rating107
Safety Designations Per Iec 60601-1 Standard107
Dimensions and Weight107
Operation Principle108
Checkpoints for Maintenance108
Disposal108
Electromagnetic Compatibility109
Requirements for the External Device112
Patient's Environment113
Reference114
Optional Accessories114
Shape of Plug114
IPA FONT LICENSE AGREEMENT V1.0115

Topcon TRK-2P - Replacing the Chinrest Tissue Paper

Table of Contents

Related product manuals