Toro 31900A - Pre-Maintenance Procedures; Raising the Machine

For the week of:Maintenance Check Item
Mon. T ues. W ed. Thurs. Fri.
Sat. Sun.
Check for unusual engine
noises.
1
.
Check for unusual operating
noises.
Check the hydraulic hoses
for damage.
Check for uid leaks.
Check the tire pressure.
Check the instrument
operation.
Lubricate all the grease
ttings.
2
T ouch up any damaged
paint.
Inspect the seat belt.
1
Check the glow plug and injector nozzles if the engine is hard to start, there is excess smoke, or the engine runs rough
2
Immediately after every washing, regardless of the interval listed
3
If the indicator shows red
Notation for Areas of Concern
Inspection performed by:
Item Date
Information
Pre-Maintenance
Procedures
Raising the Machine
DANGER
Mechanical or hydraulic jacks may fail to
support the machine and cause a serious
injury .
• Use jack stands to support the raised
machine.
• Use only mechanical or hydraulic jacks to
lift the machine.
Raising the Front of the Machine
Important: Ensure that no cables or hydraulic
components are between the jack and the frame.
g299729
Figure 44
1. Front jacking point—frame
tube
3. Front of the machine
2. Front jack stand
point—front axle tube
49