decal138-7471
138-7471
1. Engine—start 5. Push down to disengage
the cutting blade.
2. Engine—run 6. Deck—lower
3. Engine—stop 7. Deck—raise
4. Lift up to engage the
cutting blade.
decal138-7473
138-7473
1. Fast
2. Slow
decal139-6215
139-6215
1. W arning—read the
Operator ’ s Manual ; all
operators should be
trained before operating
the machine.
5. Cutting/dismemberment
hazard of hand or
foot—stay away from
moving parts; keep all
guards and shields in
place.
2. W arning—engage the
parking brake, shut of f
the engine, and remove
the key before leaving the
machine.
6. T ipping hazard—lower the
cutting units when moving
downhill; drive slowly
when turning; do not turn
sharply while traveling
fast.
3. W arning—wear hearing
protection.
7. W arning—always wear a
seatbelt when operating
the machine.
4. Thrown object
hazard—keep bystanders
away .
7
To Next Page
