Toro Groundsmaster 4300-D - Pushing or Towing the Machine; Manual Movement Procedure

RemovingtheRadiator(continued)
g189544
Figure13
1.Radiator3.Hydraulictube
2.Straighthydraulictting
(2each)
4.Hydraulictube
8.ReadtheGeneralPrecautionsforRemovingandInstallingtheHydraulic
SystemComponents(page4–87).
9.Cleanthehydraulictubeendsandoilcoolerttingstopreventhydraulic
systemcontamination.
10.Disconnectthehydraulictubesfromthestraighthydraulicttings(Figure13).
11.Coverorplugthehydraulictubestopreventcontamination.
12.Removethe2button-headscrews(item29inFigure12)and2angenuts
thatsecurethecoolantreservoirandreservoirbrackettothefanshroud.
Carefullypositionthecoolantreservoirandreservoirbracketawayfromthe
fanshroud.
13.Ontheleftsideofthemachine,removethe2button-headscrews(item29in
Figure12)and2angenutsthatsecurethefanshroudtotheradiatorframe.
14.Removethe14ange-headscrews(item6inFigure12)thatsecurethe
fanshroudtotheradiator,andradiatortotheradiatorframe.Positionthe
fanshroudawayfromtheradiator.
15.Carefullyremovetheradiatorandoilcoolerassemblyfromthemachine.
16.Ifnecessary,removethe2straighthydraulicttingsfromtheoilcoolerand
discardtheO-rings.
17.Coverorplugtheopeningsinoilcooleranddisconnectedcoolantand
hydraulictubestopreventcontaminationfromenteringthesystem.
18.Inspectallfoamsealsontheradiator,fanshroud,andradiatorframe.
Replaceanyfoamsealsthataredamaged.
Groundsmaster
®
4300-D
Page3–17
DieselEngine:ServiceandRepairs
16226SLRevC