Toro Groundsmaster 7210 - Page 288

RemovingthePTODriveshaft(continued)
B.Loosenthe2boltsand2locknuts.
C.Slidethedriveshaftendyokefromthegearboxshaft.
D.RemovethePTOdriveshaftfromthemachine.
InstallingthePTODriveshaft
1.PositionthePTOdriveshafttothemachine.
g033695
Figure202
1.Endyoke
5.Greasetting
2.Crossandbearingset
6.Yokeandsliptube
3.Greasetting
7.Endyoke
4.Yokeandshaft
Note:Ensurethatthedriveshaftyokeandsliptube(item6inFigure202)is
towardthecuttingdeckgearboxinputshaft.
2.Alignthesplinesandrollpinholesofthedriveshaftyokeswiththe
transmissionandgearboxshafts.
3.SlidethePTOdriveshaftendyokesontothetransmissionPTOshaftand
gearboxshaft.
4.InstalltheendyokesofthePTOdriveshaftasfollows:
A.Installthe2rollpinstotheendyokesandshafts.
B.Installthe4boltsand4locknutsthatattachtheendyokestothegearbox
shaftandPTOshaft;torquethelocknutsto20to25N∙m(175to225
in-lb).
5.LubricatethePTOdriveshaftgreasettings.
6.InstallthefuseF1(15A)intothefuseblock.
Chassis:ServiceandRepairs
Page6–26
Groundsmaster7210
16222SLRevC