Toshiba B-SX5 Series - 6.11 RFID SETTING

- 118 -
6.10 ADJUSTMENT MODE FOR FACTORY
< 1 > D I A G . V 1 . 0 A
< 2 > P A R A M E T E R S E T
< 3 > A D J U S T S E T
< 4 > T E S T P R I N T
< 5 > S E N S O R A D J .
< 6 > R A M C L E A R
< 7 > I P A D D R E S S
< 8 > B A S I C
< 9 > F O R F A C T O R Y
(17) System mode menu display
(BASIC address)
(19) The menu for the adjustment mode for
the factory is displayed.
[FEED] [PAUSE]
(9) System mode menu display
(Test print)
(11) System mode menu display
(Sensor display/adjustment)
(13) System mode menu display
(RAM clear)
(15) System mode menu display
(IP address setting)
[FEED]
(7) System mode menu display
(Fine adjustment value setting)
(4) Press the [FEED] key.
(5) System mode menu display
(Parameter setting)
(3) The self-test menu is displayed.
(2) While holding the [FEED] and [PAUSE]
keys down, turn the power on.
(1) Power off state
Power OFF
(6) Press the [FEED] key.
[FEED]
(8) Press the [FEED] key.
[FEED]
(10) Press the [FEED] key.
[FEED]
(12) Press the [FEED] key.
[FEED]
[FEED]
(14) Press the [FEED] key.
[FEED]
[FEED]
(16) Press the [FEED] key.
(18) Press the [FEED] key.
[PAUSE]
(20) Press the [PAUSE] key.