Toshiba B-SX5 Series - Head Broken Dots Check

- 41 -
(2) Head broken dots check
< 1 > D I A G . V 1 . 0 A
< 1 > D I A G . V 1 . 0 A
P R T T Y P E T R A N S F R
< 1 > D I A G . V 1 . 0 A
T Y P E [ S ] N O C U T
< 1 > D I A G . V 1 . 0 A
M A I N T E N A N C E C O N T
< 1 > D I A G . V 1 . 0 A
A U T O D I A G N O S T I C
< 1 > D I A G . V 1 . 0 A
H E A D C H E C K
< 1 > D I A G . V 1 . 0 A
C H E C K I N G
< 1 > D I A G . V 1 . 0 A
N O R M A L E N D
< 1 > D I A G . V 1 . 0 A
[FEED] [PAUSE]
[FEED]
[FEED]
[PAUSE]
[PAUSE]
(18) The self-test menu is displayed.
(9) Maintenance counter/various
parameters printout mode
(3) The self-test menu is displayed.
(5) Print type setting mode
(2) While holding the [FEED] and [PAUSE]
keys down, turn the power on.
(1) Power off state
Power OFF
(16) Results display (Normal end)
(15) Start of head broken dots check
(13) Head broken dots check mode
(14) Press the [PAUSE] key.
(11) Automatic self-test mode
(12) Press the [FEED] key.
(10) Press the [FEED] key.
(7) Issue type setting mode
(8) Press the [PAUSE] key.
[PAUSE]
(4) Press the [PAUSE] key.
[PAUSE]
(6) Press the [PAUSE] key.
[PAUSE]
[When a broken dot error is not found]
[PAUSE]
[When a broken dot error is
found]
(17) Press the [PAUSE] key.