Toshiba B-SX5 Series - Various Parameters Setting; Various Parameters Setting Operation Example

- 59 -
6.3 VARIOUS PARAMETERS SETTING
6.3.1 Various Parameters Setting Operation Example
< 1 > D I A G . V 1 . 0 A
< 2 > P A R A M E T E R S E T
< 2 > P A R A M E T E R S E T
R B N S A V E O N ( T A G )
< 2 > P A R A M E T E R S E T
< 1 > D I A G . V 1 . 0 A
< 2 > P A R A M E T E R S E T
< 2 > P A R A M E T E R S E T
F O N T C O D E P C - 8 5 0
< 2 > P A R A M E T E R S E T
Z E R O F O N T 0
< 2 > P A R A M E T E R S E T
S P E E D 9 6 0 0 b p s
[FEED] [PAUSE]
[FEED]
[PAUSE]
[PAUSE]
[PAUSE]
(4) Press the [FEED] key.
(3) The self-test menu is displayed.
(2) While holding the [FEED] and [RESTART]
keys down, turn the power on.
(1) Power off state
Power OFF
(6) Press the [PAUSE] key.
(8) Press the [PAUSE] key.
(9) Font “0” selection:
Select the font using the [FEED] and
[RESTART] keys.
(10) Press the [PAUSE] key.
(12) Press the [PAUSE] key.
[PAUSE]
[FEED]
[PAUSE]
[PAUSE]
(4) Press the [FEED] key.
(5) System mode menu display
(Parameter setting)
(3) The self-test menu is displayed.
(6) Press the [PAUSE] key.
(7) Ribbon saving system selection:
Select an option using the [FEED] and
[RESTART] keys.
(8) Press the [PAUSE] key.
(9) System mode menu display
(Parameter setting)
(2) While holding the [FEED] and [PAUSE]
keys down, turn the power on.
(3) The self-test menu is displayed.
[FEED] [RESTART]
(5) System mode menu display
(Parameter setting)
(7) Font code selection:
Select the code using the [FEED] and
[RESTART] keys.
(11) Communication speed selection:
Select the communication speed using
the [FEED] and [RESTART] keys.