Toshiba B-SX5 Series - 5.5 THRESHOLD SETTING

- 2 -
4. GENERAL VIEW OF KEY OPERATION
Online mode
System mode
Download mode
[Power OFF]
[Transmissive sensor threshold
setting mode]
[Reflective sensor threshold
setting mode]
Turn the power on.
While holding down the [FEED] and [RESTART]
keys, turn the power on.
While holding down the [FEED] and [PAUSE] keys,
turn the power on.
[FEED] key
[RESTART] key
[RESTART] key
Hold down the [PAUSE] key
for a few seconds.
Hold down the [RESTART] key
for a few seconds.
[FEED] key
[PAUSE] key
[Online]
[Feeds one label.]
[Pause]
[Self-test]
[Parameter setting]
[Fine adjustment value setting]
[Test print]
[RESTART] key [FEED] key
[RESTART] key [FEED] key
[RESTART] key [FEED] key
[Sensor display/adjustment]
[RESTART] key [FEED] key
[RAM clear]
[RESTART] key [FEED] key
[IP address setting]
[RESTART] key [FEED] key
[BASIC setting]
[RESTART] key [FEED] key
[FEED] key
[RESTART] key
[Self-test]
[Fine adjustment value setting]
[Test print]
[RESTART] key [FEED] key
[RESTART] key [FEED] key
[RESTART] key [FEED] key
[FOR FACTORY]
[RESTART] key [FEED] key
While holding down the [FEED],
[RESTART], and [PAUSE] keys,
turn the power on.
[Parameter setting]
[RESTART] key [FEED] key
[RFID Setting]
[RESTART] key [FEED] key
[RESTART] key [FEED] key
[Reset]
[Parameter setting]
[Fine adjustment value setting]
[Dump mode]
[RESTART] key [FEED] key
[RESTART] key [FEED] key
[RESTART] key
[FEED] key
[BASIC expansion mode]
[Automatic calibration]
[RESTART] key [FEED] key
[RESTART] key
[FEED] key
[LAN setting] (V4.4 only)