Toshiba B-SX5 Series - Max. Number of RFID Issue Retries; RFID Read Retry Time-Out; Max. Number of RFID Read Retries

- 127 -
(6) Max. number of RFID issue retries
0 to 255
Set the maximum number of retries to issue the RFID tag.
When issuing the RFID tag failed, the printer prints the error pattern, and retries to issue the
tag for up to specified number of times. If the printer does not succeed even after having
retried for the max. times, the printer stops, resulting in an error.
(7) Max. number of RFID read retries
0 to 255
Set the maximum number of retries to read the RFID tag.
The printer retries to read the data in the RFID tag for up to specified number of times. If
the time-out has come before the max. number retries have been done, the printer stops the
retries at the time.
Whenever the printer writes data onto the RFID tag, the tag is read first. The max. number
of retries set by this parameter becomes also effective in this pre-read.
(8) RFID read retry time-out
0.0 to 9.9 (0.0 second to 9.9 second)
Set the time-out for retry to read the RFID tag.
If the printer has retried for the max. number of times within the RFID read retry time-out, the
printer stops the retries at the time.
Whenever the printer writes data onto the RFID tag, the tag is read first. The read retry
time-out set by this parameter becomes also effective in this pre-read.
FEED
RESTART
• +
• Initial value (3)
• −
FEED
RESTART
• +
• Initial value (5)
• −
FEED
RESTART
• +
• Initial value (4.0)
• −